home *** CD-ROM | disk | FTP | other *** search
- !
- ! TfxConfig application defaults file
- !
- ! $Revision: 1.12 $
- !
-
- ! SGI buffing
-
- TfxConfig*useSchemes: all
- TfxConfig*sgiMode: true
- TfxConfig*schemeFileList: SgiSpec
- TfxConfig*useEnhancedFSB: true
-
- ! Help resources
-
- TfxConfig*helpProgram: /usr/sbin/nr -newwin
- TfxConfig*helpURL: file:/usr/share/Teleffect/help/UsersGuide.html
-
- ! Error messages
-
- TfxConfig*noMasterComputer: \
- The name of the master computer must\n\
- be specified.
-
- TfxConfig*noPassword: \
- Please enter a password and retype\n\
- it for confirmation.
-
- TfxConfig*noRePassword: \
- Please retype the password for confirmation.
-
- TfxConfig*smallPassword: \
- The password must be at least %d characters.
-
- TfxConfig*mismatchPassword: \
- The retyped password does not match\n\
- the original password. Please reenter\n\
- both passwords.
-
- TfxConfig*noLeftComputer: \
- The name of the left hand computer must\n\
- be specified.
-
- TfxConfig*noMiddleComputer: \
- The name of the middle computer must\n\
- be specified.
-
- TfxConfig*noRightComputer: \
- The name of the right hand computer must\n\
- be specified.
-
- TfxConfig*noCustomLayout: \
- A layout configuration must be specified.
-
- TfxConfig*sameComputer: \
- The same computer cannot be listed more\n\
- than once.
-
- TfxConfig*dupLayout: \
- The computer '%s' is listed more than once.
-
- ! Main dialog resources
-
- TfxConfig*title: Teleffect Configuration Wizard
- TfxConfig*textFInsensitiveBackground: SGI_DYNAMIC ReadOnlyBackground
- TfxConfig*dialog.okLabelString: < Back
- TfxConfig*dialog.applyLabelString: Next >
- TfxConfig*dialog.finishLabelString: Finish
- TfxConfig*dialog*XmFrame.marginWidth: 10
- TfxConfig*dialog*XmFrame.marginHeight: 10
- TfxConfig*dialog*beRootMsg.labelString: \
- \n\
- You must be the 'root' user in order to run the\n\
- Teleffect configuration tool.\n\
- \n\
- Please press Cancel and rerun 'Teleffect' as 'root'.\n
- TfxConfig*dialog*beRootMsg.alignment: ALIGNMENT_BEGINNING
-
- ! Welcome card
-
- TfxConfig*welcomeCard*title.labelString: Teleffect
- TfxConfig*welcomeCard*copyrightLabel.labelString: \
- Teleffect 1.0 is brought to you by:\n\
- \n\
- Adam Feder\n\
- Richard Lee\n\
- Chris Schoeneman\n\
- \n\
- Copyright (c) 1998 Electric Arc LLC
-
- TfxConfig*welcomeCard*warningLabel.labelString: \
- Warning: This computer program is protected by copyright\n\
- law and international treaties. Unauthorized reproduction\n\
- or distribution of this program, or any portion of it, may\n\
- result in severe civil and criminal penalties, and will be\n\
- prosecuted to the maximum extent possible under the law.
-
- TfxConfig*welcomeCard*cryptlibLabel.labelString: \
- Teleffect includes cryptographic software developed by\n\
- Peter Gutmann, Eric Young, and Colin Plumb.
-
- TfxConfig*welcomeCard*fontList: SGI_DYNAMIC PlainLabelFont
- TfxConfig*welcomeCard*copyrightLabel.alignment: ALIGNMENT_CENTER
- TfxConfig*welcomeCard*warningLabel.alignment: ALIGNMENT_BEGINNING
- TfxConfig*welcomeCard*cryptlibLabel.alignment: ALIGNMENT_BEGINNING
- TfxConfig*welcomeCard*warningLabel.topOffset: 20
- TfxConfig*welcomeCard*cryptlibLabel.topOffset: 20
-
-
- ! Title card
-
- TfxConfig*titleCard*title.labelString: Teleffect
- TfxConfig*titleCard*titleLabel.labelString: \
- Teleffect is a system that allows you to control a group of\n\
- networked computers using the mouse and keyboard attached\n\
- to one of the computers.\n\
- \n\
- This wizard will guide you through a short process to install\n\
- Teleffect on this computer. You will also need to install\n\
- Teleffect on the other computers in the group.
-
- TfxConfig*titleCard*titleLabel.alignment: ALIGNMENT_BEGINNING
- TfxConfig*titleCard*titleLabel.fontList: SGI_DYNAMIC PlainLabelFont
- TfxConfig*titleCard*enableRadio.spacing: 0
- TfxConfig*titleCard*enableRadio.topOffset: 10
- TfxConfig*titleCard*enableRadio.leftOffset: 10
- TfxConfig*titleCard*enableT.labelString: Enable Teleffect
- TfxConfig*titleCard*disableT.labelString: Disable Teleffect
-
- ! Master computer card
-
- TfxConfig*masterCard*title.labelString: Select Master Computer
- TfxConfig*masterCard*masterLabel.labelString: \
- Teleffect allows you to provide input to a group of networked\n\
- computers using the mouse and keyboard attached to one of\n\
- those computers.\n\
- \n\
- Before you begin, you should select which computer will have\n\
- the keyboard and mouse attached. This machine will be called\n\
- the master computer. You should also collect the names of\n\
- all the computers in the group.\n\
- \n\
- Is this the computer to which the keyboard and mouse are\n\
- directly connected?
-
- TfxConfig*masterCard*masterLabel.alignment: ALIGNMENT_BEGINNING
- TfxConfig*masterCard*masterLabel.fontList: SGI_DYNAMIC PlainLabelFont
- TfxConfig*masterCard*masterRadio.spacing: 0
- TfxConfig*masterCard*masterRadio.leftOffset: 10
- TfxConfig*masterCard*masterYesT.labelString: Yes
- TfxConfig*masterCard*masterNoT.labelString: No
- TfxConfig*masterCard*compLabel.labelString: \
- Name of the computer to which\n\
- keyboard and mouse are attached:
-
- TfxConfig*masterCard*compLabel.alignment: ALIGNMENT_BEGINNING
- TfxConfig*masterCard*compLabel.fontList: SGI_DYNAMIC PlainLabelFont
- TfxConfig*masterCard*compForm.leftOffset: 25
- TfxConfig*masterCard*compField.columns: 15
-
- ! Security card
-
- TfxConfig*securityCard*title.labelString: Security Level
- TfxConfig*securityCard*securityLabel.labelString: \
- Teleffect provides optional authentication and encryption of\n\
- communication between the computers in the group. The security\n\
- level and password must be the same for all computers in the\n\
- group. Please select a security level.
-
- TfxConfig*securityCard*securityLabel.alignment: ALIGNMENT_BEGINNING
- TfxConfig*securityCard*securityLabel.fontList: SGI_DYNAMIC PlainLabelFont
- TfxConfig*securityCard*securityRadio.spacing: 0
- TfxConfig*securityCard*securityRadio.leftOffset: 10
- TfxConfig*securityCard*securityNoT.labelString: \
- No authentication or encryption
- TfxConfig*securityCard*securityYesT.labelString: \
- Password-based security
- TfxConfig*securityCard*useLabel.labelString: \
- You will not need to use the password while using Teleffect.\n\
- You only need it to install Teleffect on other computers.\n\
- DO NOT use your login password. The password must be\n\
- at least 6 characters.
- TfxConfig*securityCard*useLabel.alignment: ALIGNMENT_BEGINNING
- TfxConfig*securityCard*useLabel.fontList: SGI_DYNAMIC PlainLabelFont
- TfxConfig*securityCard*useLabel.leftOffset: 25
- TfxConfig*securityCard*passwdForm.rightOffset: 80
- TfxConfig*securityCard*passwdForm.topOffset: 10
- TfxConfig*securityCard*pwLabel.labelString: Password:
- TfxConfig*securityCard*pwLabel.alignment: ALIGNMENT_END
- TfxConfig*securityCard*pwLabel.fontList: SGI_DYNAMIC PlainLabelFont
- TfxConfig*securityCard*pwField.columns: 20
- TfxConfig*securityCard*repwForm.topOffset: 5
- TfxConfig*securityCard*repwLabel.labelString: Retype Password:
- TfxConfig*securityCard*repwLabel.alignment: ALIGNMENT_END
- TfxConfig*securityCard*repwLabel.fontList: SGI_DYNAMIC PlainLabelFont
- TfxConfig*securityCard*repwField.columns: 20
-
- ! Cut and paste card
-
- TfxConfig*cutPasteCard*title.labelString: Cut and Paste
- TfxConfig*cutPasteCard*cutPasteLabel.labelString: \
- Teleffect allows cutting and pasting between computers.\n
- TfxConfig*cutPasteCard*cutPasteLabel.alignment: ALIGNMENT_BEGINNING
- TfxConfig*cutPasteCard*cutPasteLabel.fontList: SGI_DYNAMIC PlainLabelFont
- TfxConfig*cutPasteCard*cutPasteRadio.spacing: 0
- TfxConfig*cutPasteCard*cutPasteRadio.leftOffset: 10
- TfxConfig*cutPasteCard*cutPasteYesT.labelString: Enable cut and paste
- TfxConfig*cutPasteCard*cutPasteNoT.labelString: Disable cut and paste
-
- ! Computer count card
-
- TfxConfig*countCard*title.labelString: Number of Computers
- TfxConfig*countCard*countLabel.labelString: \
- How many computers are there in the group (including the\n\
- master computer)?
-
- TfxConfig*countCard*countLabel.alignment: ALIGNMENT_BEGINNING
- TfxConfig*countCard*countLabel.fontList: SGI_DYNAMIC PlainLabelFont
- TfxConfig*countCard*countRadio.spacing: 0
- TfxConfig*countCard*countRadio.leftOffset: 10
- TfxConfig*countCard*countTwoT.labelString: Two computers side-by-side
- TfxConfig*countCard*countThreeT.labelString: Three computers side-by-side
- TfxConfig*countCard*customT.labelString: Custom layout (Advanced)
-
- ! Layout card
-
- TfxConfig*layoutCard*title.labelString: Layout of Computers
- TfxConfig*layoutCard*normalLayoutMsg: \
- Teleffect needs to know the relationship between the computers\n\
- in the group so that it can properly move the pointer between\n\
- them. Please enter the name of the computer in its position\n\
- in the group. Note that one of the computers must be this\n\
- machine.
-
- TfxConfig*layoutCard*customLayoutMsg: \
- Teleffect needs to know the relationship between the computers\n\
- in the group so that it can properly move the pointer between\n\
- them. Because this is a custom installation, you will need to\n\
- directly edit the layout configuration file. Please refer to\n\
- the Teleffect documentation for an explanation of this file format.
-
- TfxConfig*layoutCard*layoutLabel.alignment: ALIGNMENT_BEGINNING
- TfxConfig*layoutCard*layoutLabel.fontList: SGI_DYNAMIC PlainLabelFont
- TfxConfig*layoutCard*customForm.topOffset: 10
- TfxConfig*layoutCard*posForm.rightOffset: 100
- TfxConfig*layoutCard*posForm.topOffset: 10
- TfxConfig*layoutCard*leftLabel.labelString: Left computer:
- TfxConfig*layoutCard*leftLabel.alignment: ALIGNMENT_END
- TfxConfig*layoutCard*leftLabel.fontList: SGI_DYNAMIC PlainLabelFont
- TfxConfig*layoutCard*leftField.columns: 20
- TfxConfig*layoutCard*middleForm.topOffset: 5
- TfxConfig*layoutCard*middleLabel.labelString: Middle computer:
- TfxConfig*layoutCard*middleLabel.alignment: ALIGNMENT_END
- TfxConfig*layoutCard*middleLabel.fontList: SGI_DYNAMIC PlainLabelFont
- TfxConfig*layoutCard*middleField.columns: 20
- TfxConfig*layoutCard*rightForm.topOffset: 5
- TfxConfig*layoutCard*rightLabel.labelString: Right computer:
- TfxConfig*layoutCard*rightLabel.alignment: ALIGNMENT_END
- TfxConfig*layoutCard*rightLabel.fontList: SGI_DYNAMIC PlainLabelFont
- TfxConfig*layoutCard*rightField.columns: 20
-
- ! Finish card
-
- TfxConfig*finishCard*title.labelString: Summary
- TfxConfig*finishCard*finishSW.background
- TfxConfig*finishCard*masterLabel.alignment: ALIGNMENT_BEGINNING
- TfxConfig*finishCard*masterLabel.fontList: SGI_DYNAMIC PlainLabelFont
- TfxConfig*finishCard*authLabel.alignment: ALIGNMENT_BEGINNING
- TfxConfig*finishCard*authLabel.fontList: SGI_DYNAMIC PlainLabelFont
- TfxConfig*finishCard*cutPasteLabel.alignment: ALIGNMENT_BEGINNING
- TfxConfig*finishCard*cutPasteLabel.fontList: SGI_DYNAMIC PlainLabelFont
- TfxConfig*finishCard*countLabel.alignment: ALIGNMENT_BEGINNING
- TfxConfig*finishCard*countLabel.fontList: SGI_DYNAMIC PlainLabelFont
- TfxConfig*finishCard*leftLabel.alignment: ALIGNMENT_BEGINNING
- TfxConfig*finishCard*leftLabel.fontList: SGI_DYNAMIC PlainLabelFont
- TfxConfig*finishCard*middleLabel.alignment: ALIGNMENT_BEGINNING
- TfxConfig*finishCard*middleLabel.fontList: SGI_DYNAMIC PlainLabelFont
- TfxConfig*finishCard*rightLabel.alignment: ALIGNMENT_BEGINNING
- TfxConfig*finishCard*rightLabel.fontList: SGI_DYNAMIC PlainLabelFont
-
- TfxConfig*finishCard*summaryForm.marginWidth: 10
- TfxConfig*finishCard*summaryForm.marginHeight: 10
- TfxConfig*finishCard*authLabel.topOffset: 10
- TfxConfig*finishCard*cutPasteLabel.topOffset: 10
- TfxConfig*finishCard*countLabel.topOffset: 10
- TfxConfig*finishCard*leftLabel.leftOffset: 30
- TfxConfig*finishCard*middleForm.leftOffset: 30
- TfxConfig*finishCard*rightLabel.leftOffset: 30
-
- TfxConfig*finishCard*disabledMsg: \
- Teleffect will be disabled on this computer.
-
- TfxConfig*finishCard*masterMsg: \
- Teleffect will be configured with this computer\n\
- as the master. This means that the keyboard and\n\
- mouse are connected to this computer.
-
- TfxConfig*finishCard*clientMsg: \
- Teleffect will be configured with this computer\n\
- as a slave. This means that the keyboard and\n\
- mouse are connected to the computer '%s'.
-
- TfxConfig*finishCard*authMsg: \
- Authentication and encryption will%s be used.
-
- TfxConfig*finishCard*cutPasteMsg: \
- Cut and paste between computers will be %s.
-
- TfxConfig*finishCard*normalCountMsg: \
- The group will consist of the following computers:
-
- TfxConfig*finishCard*customCountMsg: \
- The group will be specified by a custom layout.
-
- TfxConfig*finishCard*leftMsg: Left computer: %s
- TfxConfig*finishCard*middleMsg: Middle computer: %s
- TfxConfig*finishCard*rightMsg: Right computer: %s
-